Digital Vernier Caliper

ABSOLUTE Coolant Proof Caliper SERIES 500 — with Dust/Water Protection Conforming to IP67 Level
• ABS Coolant Proof Caliper with Dust/Water Protection conforming to IP67 Level. Can be used in workshop conditions exposed to coolant, water, dust or oil. 100% air-leak test ensures every caliper conforms to IP67.
• Large characters on the display provide better visibility, and high-contrast LCD reduces eyestrain.
• Easy to use — advanced ergonomic design uses only 1 button.
• The automatic power-on/off function shuts down the LCD display after 20 minutes inactivity, but the ABS scale origin is unaffected. Power is restored to the display when the slider is moved.

• Incorporates Mitutoyo’s ABSOLUTE measurement system. No need to reset the origin.
• Allows step measurement.
• Battery cap does not require a screw driver for battery replacement (except for 0 to 300 mm/0 to 12 inch models).
• Extended battery life of approx. 5 years due to low current integrated circuit (except for 0 to 300 mm/0 to 12 inch models).
• Can be integrated into statistical process control and measurement systems.
• An inspection certificate is supplied as standard. (This cannot be used as a calibration certificate as it is undated.)

Functions:

Origin-set: Absolute origin position can be changed.
Data output^*: Measurement data output connector allows integration into statistical process control and measurement systems.
Automatic power on/off: LCD display will turn off after 20 minutes inactivity, but ABS scale origin is stored. Power is restored when the slider is moved.
Alarm: Error message is displayed if error in calculation is found and measurement is stopped. Also indicates battery voltage warnings.

Technical Data:

Resolution: 0.01 mm or 0.0005 in/0.01 mm
Dust/Water Protection Level: IP67 (IEC60529^*2)
Scale type: ABSOLUTE electromagnetic induction linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 5 years under normal use

No Need to Reset the Origin After Switching On

Mitutoyo’s ABSOLUTE System retains the origin point even after power off, eliminating the need to reset it after switching on.

Optional Accessories

Connecting Cables for IT / DP / MUX^*1
• 05CZA624: SPC cable with data button (1 m)
• 05CZA625: SPC cable with data button (2 m)

^*1 Cannot be used for other than water-resistant type Digital calipers with external output function.
^*2 IP67 model is waterproof-proofed suitable for the factory floor. Buzzer type is not water/dust-proof.

USB Input Tool Direct
• 06AFM380A: SPC cable for USB-ITN-A (2 m)
U-WAVE-TCB Transmitter^*2 (Mitutoyo Bluetooth® U-WAVE)
• 264-624 (IP67 type), 264-625 (Buzzer type)
Refer to page A-10 for details.
Wireless Data Output – U-WAVE Fit
• U-WAVE-TC: 02AZD730G (IP67 type), 02AZD880G (Buzzer type)
• U-WAVE-TC: 264-620 (IP67 type), 264-621 (Buzzer type)
Connecting Unit for U-WAVE-TC/TCB
• 02AZF310 (IP67 type)
Refer to pages A-10 and A-12 for details.

IP67 Protection Level:

First digit “6”: Dust-proof – No ingress of dust allowed.
Second digit “7”: Protected against water penetration – Temporary immersion in water under standardized conditions.

First characteristic number		Second characteristic number
Number	Protection from solid objects (people or things) Brief description	Number	Protection from liquids (water, etc.) Brief description
6	Dust-proof — No ingress of dust allowed.	7	Protected against water penetration — Ingress of water in quantities causing harmful effects shall not be possible when the enclosure is temporarily immersed in water under standardized conditions of pressure and time.

Note: For details of the test conditions used in evaluating each degree of protection, please refer to the original standard.

Specifications

Metric

Order No.	Range (mm)	Maximum permissible error (mm) E_MW, S_MW	Measurement data output port	Mass (g)	Thumb roller	Remarks
500-702-20	0–150	—	—	168	✓	—
500-703-20	0–200	—	—	198	✓	—
500-706-20	0–150	—	✓	168	✓	—
500-707-20	0–200	—	✓	198	✓	—
500-716-20	0–150	—	—	168	—	—
500-717-20	0–200	—	—	198	—	—
500-712-20	0–150	±0.02 / ±0.04	✓	168	✓	—
500-713-20	0–200	±0.02 / ±0.04	✓	198	✓	Depth bar ø1.9 mm
500-719-20	0–150	—	✓	168	✓	Carbide-tipped jaws for outside measurement
500-721-20	0–200	—	✓	198	✓	Carbide-tipped jaws for outside measurement
500-722-20	0–150	—	✓	168	✓	Carbide-tipped jaws for outside and inside measurement
500-723-20	0–200	—	✓	198	✓	Carbide-tipped jaws for outside and inside measurement
500-724-20	0–150	—	✓	168	✓	—
500-725-20	0–200	—	✓	198	✓	—
500-718-20	0–300	±0.03 / ±0.05	✓	345	✓	—
500-704-20	—	—	✓	350	—	—
500-708-20	—	—	✓	345	—	—

Inch / Metric

Order No.	Range (in)	Maximum permissible error E_MW, S_MW	Measurement data output port	Mass (g)	Thumb roller	Remarks
500-731-20	0–6	—	—	168	✓	Carbide-tipped jaws for outside measurement
500-732-20	0–8	—	—	198	✓	Carbide-tipped jaws for outside measurement
500-733-20	0–6	—	✓	168	✓	Carbide-tipped jaws for outside and inside measurement
500-734-20	0–8	—	✓	198	✓	Carbide-tipped jaws for outside and inside measurement
500-735-20	0–6	—	✓	168	✓	—
500-736-20	0–8	—	✓	198	✓	—
500-737-20	0–6	±0.01 in / ±0.02 mm	✓	168	✓	—
500-738-20	0–8	±0.01 in / ±0.02 mm	✓	198	✓	—
500-752-20	0–6	—	✓	168	✓	—
500-753-20	0–8	—	✓	198	✓	—
500-762-20	0–6	—	✓	168	✓	Depth bar ø1.9 mm
500-763-20	0–8	—	✓	198	✓	Depth bar ø1.9 mm
500-764-20	0–12	±0.0015 in / ±0.025 mm	✓	350	✓	—
500-765-20	0–12	—	✓	350	✓	—

* Partial Surface Contact Error, E_MW and S_MW are terms used in ISO 13385-1:2019.

Digital Vernier Caliper